1200L Canister (Multi-Element Housing with SS Components)

Description

Specifications

• Dimensions: 44.0″H x 16.75″W x 16.75″D
• 1 1/2″ NPT Inlet, Outlet, Drain STD
• Element Lifters Included

Used For

• Water Chilling Fluids
• Water-Based Hydraulic Fluids
• Engine Coolants
• Cutting Coolants
• All Water-Based Cooling Fluids
• All Water-Based Lubricating Fluids

Capacity & Flow Rate

• Requires 56 Qt./53 L. of makeup fluid (housing volume)
• *Ideal sump range from 251-1000 Gal./950.1-3785.4 L.
• **Flow rate range from 5-20 GPM/18.9-75.7 LPM

Overall Dimensions & Weight

• 43.5” (H) Plus 25” clearance above to change filter
• 16.75” (W)
• 16.75” (D)
• 128 LB. shipping weight

Other Specifications

• Max operating pressure, 125 PSI
• 1 1/2” FNPT inlet, outlet & drain ports
• ***Powder-coating inside and outside of housing
• ***Stainless-steel turn-down-bolt and components
• Use with all water-based petroleum or synthetic fluids

Recommended Element

• X2 Model 1222 for water-based fluids with viscosity equivalent to Diesel-32
• X3 Model 1223 for water-based fluids with viscosity equivalent to 46-68 or for increased flow for thinner fluids
• X2 Model 1224 for water-based fluids with viscosity equivalent to 100-150 or for increased flow for thinner fluids

Notes

• **Flow rates are established using ISO 10-1000 viscosity oils at the standard 40° C/104° F and are subject to vary
• *Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
• Most applications, elements need to be changed between 500-1000 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI