Description
Overview
These custom systems can be built to your configurations and specifications. The same Harvard™ Brand quality will reduce waste generated significantly.
Used For
- Hydraulic Oil
- Transmissions Oil
- Other low viscosity oil
- Use with petroleum or synthetic fluids
Capacity, Sump Size & Flow Rate
- Requires 20 Qt./18.9 L. of makeup fluid (housing volume)
- **Sump range: 80-270 Gal./302.83-1022.06 L.
- *Flow rate range for ISO: 10-32 from .95-3.25 GPM/3.6-12.3 LPM
- *Flow rate range for ISO 46-150 from .69-1.5 GPM/2.6-5.7 LPM
Other Specifications
- 5 GPM 65 PSI pump (not fluid flow rate)
- 3/4 HP 1725 RPM motor (TEFC)
- 120 volt, single phase
- Wire directly into shop electricity (Does not come with power cord)
- PSI switch low limit-12, high limit-65
- Pressure gauge
- Push sample port (located on back panel)
- Plumb directly into shop (Does not come with hoses)
-Suction port-3/4” female NPT
-Discharge port–1/2” female NPT - Max operating pressure 80 PSI
- **Optimal running pressure between 20-50 PSI (change filter when
50-60 PSI)
Overall Dimensions
- 46” (H) Plus 20” Clearance above to remove filter
- 17” (W)
- 21” (D)
- 153 lbs./69.4 kg. shipping weight
Recommended Elements
- X1 Model 1002 for ISO: 10, 15, 22, 32
- X1 Model 1004 for ISO: 46, 68, 100, 150
Notes
- **Flow rates are established using ISO 10-150 viscosity oils at the standard 40° C/104° F and are subject to vary
- **Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
- Most applications, elements need to be changed between 300-1000 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI
- Available in stainless-steel
- Available option for water-based lubricants
- Other system configurations are available
