PORTABLE DUAL 1000 SYSTEM (Portable Double Housing Hyd System)

Description

Overview

With portable hydraulic oil filter cart removes contaminants to a single micron, removes water and glycol. Portable design moves easily from site to site, increases fluid life, decreases hazardous waste disposal. Use on most synthetic and petroleum-based fluids. Operation/service manual included. Applications: for most hydraulic and lube oil reservoirs in manufacturing, machine shops, injection molding, oil EDM machines. Configuration: single housing, dual housing, optional bag filter. Flow rate: 1 – 8 GPM”.

Used For

• Hydraulic Oil
• Transmissions Oil
• Other low viscosity oil
• Use with petroleum or synthetic fluids

Capacity, Sump Size & Flow Rate

• Requires 40 Qt./37.9 L. of makeup fluid (housing volume)
• **Cold oil sump range: 74-300 Gal./280.1-1135.6 L.
• **Warm oil sump range: 145-520 Gal/548.9-1968.4 L.
• **Hot oil sump range: 330-680 Gal/1249.2-2574.1 L.
• *Flow rate range for ISO: 10-32 from 1.9-6.5 GPM/7.2-24.6 LPM
• *Flow rate range for ISO 46-150 from 1.38-3.0 GPM/5.2-11.4 LPM

Other Specifications

• 8 GPM 65 PSI pump (not fluid flow rate)
• 3/4 HP 1725 RPM motor (TEFC)
• 120 volt, single phase
• 12’ heavy duty power cord
• PSI switch low limit-12, high limit-65
• Pressure gauge
• Push sample port (located on back panel)
• Transfer valve
• Hoses -Suction-3/4” ID x 10’ (3/4” male NPT x 3/4” female JIC) -Discharge-5/8” ID x 10’ (3/4” male NPT x 5/8” female JIC)
• Max operating pressure 80 PSI
• **Optimal running pressure between 20-50 PSI (change filter when 50-60 PSI)

Overall Dimensions

• 46” (H) Plus 20” Clearance above to remove filter
• 23” (W)
• 23” (D)
• 195 lbs./88.5 kg. shipping weight

Recommended Elements

• X2 Model 1002 for ISO: 10, 15, 22, 32
• X2 Model 1004 for ISO: 46, 68, 100, 150

Notes

• **Flow rates are established using ISO 10-150 viscosity oils at the standard 40° C/104° F and are subject to vary
• **Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
• Most applications, elements need to be changed between 300-1000 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI
• Available in stainless-steel
• Available option for water-based lubricants
• Other system configurations are available