1006 Series Element (Bypass Filter/Element)

Description

Overall Dimensions of 1006 filter element: 7.50″ dia. x 19.75″ lg.

Designed to filter oil-based EDM fluids, gear and high viscosity oils. For Viscosity of ISO 220-320.

• Removes contaminants as low as 1-micron
• Removes water and particles
• Does not remove or deplete additives

Uses of 1006 filter elements

• Gear Oil
• Engine Oil
• Other high viscosity oil-based lubricants

Capacity & Flow Rate

• Requires 20 Qt./18.9 L. of makeup fluid (housing volume)
• *Ideal sump range from 16-250 Gal./60.6-946.4 L.
  Lube 16-22 Gal./60.6-83.3 L.
  Gear 151-250 Gal./571.6-946.4 L.
• **Flow rate range of hydraulic filter element: See chart

Specifications of 1006 filter element

• Beta3=250
• Max operating pressure 80 PSI
• Overall dimensions 19.75” (H) 7.5” (D)
• Used with petroleum or synthetic fluids

**Chart data G—Gallons Per Minute, L-Liters Per Minute

Recommended Viscosities

• ISO: 220, 320
• SAE: 50

Notes

• **Flow rates are established using ISO 220-320 viscosity oils at the standard 40° C/104° F and are subject to vary
• *Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
• Most applications, elements need to be changed between 500-1000 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI
• The max dirt & water capacities are determined when the flow is reduced by half the original flow (this is the optimal operating condition)