Description
Overall Dimensions: 7.50″ dia. x 19.75″ lg. Designed to filter gear oils and very heavy viscosity oils. For Viscosity of ISO 460 to 1000.- Removes contaminants as low as 1-micron
- Removes water and particles
- Does not remove or deplete additives
Used For
- Hydraulic Oil
- Engine Oil
- Cutting Oil
- Other low viscosity oil-based lubricants
- Diesel Fuel
Capacity & Flow Rate
- Requires 56 Qt./53 L. of makeup fluid (housing volume) per filter set
- *Ideal sump range from 23-1000 Gal./87.1-3785.4 L. Lube 23-88 Gal./87.1-333.1 L. per filter set Hydraulic 251-1000 Gal./950.1-3785.4 L. per filter set
- **Flow rate range of hydraulic filter element 5< GPM/18.9< LPM
Specifications
- Beta3=250
- Max operating pressure 125 PSI
- Overall dimensions 15.25” (H), 11” (D)
- Used with petroleum or synthetic fluids & diesel fuel
Recommended Viscosities
- Diesel
- ISO: 10, 15, 22, 32
- SAE: 5W, 10W
Notes
- **Flow rates are established using ISO 10-32 viscosity oils at the standard 40° C/104° F and are subject to vary
- *Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
- Most applications, elements need to be changed between 500-1000 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI
- The max dirt & water capacities (per filter set of 2 elements) are determined when the flow is reduced by half the original flow (this is the optimal operating condition)
- Each housing requires two 1202 filter elements
- Capacity, flow rate, and sump size are based on housing size, requiring two 1202 filter elements
Reviews
There are no reviews yet.